Castable Abutments

med Castable Abutments temp_abut_titanium1 Castable Abutments

Introduction

 

UCLA Casting abutments with a full body or press-fit plastic sleeve on a metal base.

The plastic material burns without residues or ashes inside the furnace and used to construct custom shape abutments and structures.

Two types of connection are available: 

Anti-rotational (Hexagon) – for custom casting prosthetic restorations on a single implant or multiple implants

Rotational (Cylindrical) – for custom casting prosthetic restorations – only on multiple implant structures.

 

DSI Plastic Abutments 

ucla1 Castable Abutments

Straight UCLA Plastic Castable Abutment Hex/Rotational

Width Height Connection Code
  4.0 mm 9.5 mm Hex   SACH
 4.0 mm 9.5 mm Rotational SACN
 3.5 mm 9.5 mm 3.0 Narrow NACH

 
uclas Castable Abutments

Straight UCLA Plastic Castable
Abutment Metal Base Abutment
Width Height Connection Metal Code
  4.0 mm 11.0 mm Hex Titanium SAMH
 4.0 mm 11.0 mm Rotational Titanium SAMN
 3.5 mm 11.0 mm Hex CoCr CAMH
 
                                                                                                                                                                                                                                                            
         DSI Anatomic Plastic Abutments 
 
 Anatomic-Straight-Plastic-Abutment Castable Abutments
UCLA Plastic Castable Straight Anatomic Abutment Internal Hex
Width Height Collar Code
4.8 mm 9.5 mm 1 mm SACH01
4.8 mm 9.5 mm 2 mm SACH02
4.8 mm 9.5 mm 3 mm SACH03
4.8 mm 9.5 mm 4 mm SACH04 
Anatomic-Angulated-15 Castable Abutments
UCLA Plastic Castable Anatomic Angulated 15° Abutment Internal Hex 
Width Height Collar Code
4.8 mm 8.5 mm 1 mm SAC15-1
4.8 mm 9.5 mm 2 mm SAC15-2
4.8 mm 9.5 mm 3 mm SAC15-3
4.8 mm 9.5 mm 4 mm SAC15-4
 Anatomic-Angulated-25 Castable Abutments
UCLA Plastic Castable Anatomic Angulated 25° Abutment Internal Hex 
Width Height Collar Code
4.8 mm 8.5 mm 1 mm SAC25-1
4.8 mm 9.5 mm 2 mm SAC25-2
4.8 mm 9.5 mm 3 mm SAC25-3
4.8 mm 9.5 mm 4 mm SAC25-4
 
Multi-unit-plastic-castable Castable Abutments
Universal Plastic Sleeve Burnout Abutment for Multi-unit
Width Height Code
4.8 mm 10.5 mm SSPFMU
 
Plastic-Pop-up-Cap-1 Castable Abutments
Plastic Pop-up Cap Transfer
Width Height Cuff Height Code
5.5 mm 10 mm 6 mm SPUT0
 
 
 

 

© 2018 DSI All Rights Reserved. haAvoda 59 | Light Industrial Zone | 7706300 Israel | Tel: +1.972.200.3265 | Cell: +972.586.100.500 | Fax +972.899.59449