SAAC15-1, SAAC15-2, SAAC15-3, SAAC15-4: Angulated concave abutment 15° *Regular*
SAAC25-1, SAAC25-2, SAAC25-3, SAAC25-4: Angulated concave abutment 25° *Regular*
STAA15-S: Angulated abutment 15° *Narrow*
STAA15:-7 Angulated abutment 15° 7mm height *Regular*
STAA15, STAA15L: Angulated abutment 15° 9 and 11mm height *Regular*
STAA25, STAA25L: Angulated abutment 25° 9 and 11mm height *Regular*
STAA35: Angulated abutment 35° *Regular*
STAA45: Angulated abutment 45° *Regular*
STAA15-1, STAA15-2, STAA15-3, STAA15-4: Angulated anatomic abutment 15° *Regular*
STAA25-1, STAA25-2, STAA25-3, STAA25-4: Angulated anatomic abutment 25° *Regular*
PMUA-NB-RP15, PMUA-NB-RP25, PMUA-NB-RP35, PMUA-NB-RP45: Straight conical multi-unit kit RP platform 4.3-5.0mm conical connection
PMUA-NB-RP1710, PMUA-NB-RP1720: Angulated conical multi-unit 17° RP platform 4.3-5.0mm conical connection
PMUA-NB-RP3010, PMUA-NB-RP3020: Angulated conical multi-unit 30° RP platform 4.3-5.0mm conical connection
PMUA-NB-NP15, PMUA-NB-NP25, PMUA-NB-NP35, PMUA-NB-NP45: Straight conical multi-unit kit NP platform 3.5mm conical connection
PMUA-NB-NP1710, PMUA-NB-NP1720: Angulated conical multi-unit 17° NP platform 3.5mm conical connection
PMUA-NB-NP3010, PMUA-NB-NP3020: Angulated conical multi-unit 30° NP platform 3.5mm conical connection
SD-GBR: Full Kit
SDS-140-060, SDS-140-080, SDS-140-100: screws Ø1.4mm L (6.0, 8.0, 10.0mm)
SDS-160-060, SDS-160-080, SDS-160-100: screws Ø1.6mm L (6.0, 8.0, 10.0mm)
SDB-140-035: purple tack Ø2.5/0.85, L (3.5mm)
SDB-140-050: blue tack Ø2.5/0.85, L (5.0mm)
DH-01: driver handle
TA-01: tack applicator
TH-01: turning handle
SD-PD12, SD-PD14, SD-PD20: GBR pilot drill Ø1.2, 1.4, 2.0mm
TR-01, TR-02, TR-03: drivers L ( 20, 26, 52mm)
NLBC-50: NLBC drill
NLBC-ST5: NLBC stopper
BT-03, BT05: bone tack case (red and blue) for 20 tacks
SPD-T36-022: titanium membrane (pores) Ø0.6mm, size 36.0x22.0mm
SDP-S22-015, SDP-S44-044: titanium membrane (pores) Ø1.4mm, size 22.0x15.0mm, 44.0x44.0mm
MT-414: mallet
DSI-KINUS: Full kit
CR28, CR33, CR38: crestal reamer Ø2.8, 3.3, 3.8mm
GD20: guide drill Ø2.0mm
LD65: lateral drill Ø6.5mm
SC2550: side cutter Ø2.4mm
STD02, STD03, STD04, STD05, STD06, STD07: stopper L (2, 3, 4, 5, 6, 7mm)
WD65-10, WD65-20, WD65-30: window drill Ø1.0, 2.0, 3.0mm
HNCR-1: sinus curette L 170mm
HNCR-2: sinus curette L 160mm
HNCR-3: sinus curette L 155mm
HNCR-4: sinus curette L 160mm
DG0246: bone condenser / depth gauge
BCCAS: bone carrier (crestal approach)
BC0511: bone carrier (lateral approach)
AT3050: aqua tip
STB: silicone tube
TA-NB-NP15, TA-NB-NP30, TA-NB-NP45: Straight anatomic snap-on conical transfer NP platform 3.5mm conical connection
TA-NB-RP15, TA-NB-RP30, TA-NB-RP45: Straight anatomic snap-on conical transfer RP platform 4.3-5.0mm conical connection
TAP-NB-NP1515M,TAP-NB-NP1530M: Angulated patented conical snap-on transfer 15° NP platform 3.5mm conical connection
TAP-NB-NP2515M, TAP-NB-NP2530M: Angulated patented conical snap-on transfer 25° NP platform 3.5mm conical connection
TAP-NB-RP1515M,TAP-NB-RP1530M: Angulated patented conical snap-on transfer 15° RP platform 4.3-5.0mm conical connection
TAP-NB-RP2515M, TAP-NB-RP2530M: Angulated patented conical snap-on transfer 25° RP platform 4.3-5.0mm conical connection
SPUT0: Transfer plastic cap
SCA-NP, SCA-RP: Insertion screws narrow and regular
UL-A1: DSI UniLite Universal Composite In Syringe 4g Shade A1
UL-A2: DSI UniLite Universal Composite In Syringe 4g Shade A2
UL-A3: DSI UniLite Universal Composite In Syringe 4g Shade A3
UL-A3.5: DSI UniLite Universal Composite In Syringe 4g Shade A3.5
UL-B1: DSI UniLite Universal Composite In Syringe 4g Shade B1
UL-B2: DSI UniLite Universal Composite In Syringe 4g Shade B2
UL-C2: DSI UniLite Universal Composite In Syringe 4g Shade C2
UL-OA2: DSI UniLite Universal Composite In Syringe 4g Shade Opaque light
UL-OA3: DSI UniLite Universal Composite In Syringe 4g Shade Opaque dark
UL-UD: DSI UniLite Universal Composite In Syringe 4g Shade universal
MU-NO-OT: open tray transfer
MU-ANNO: analog
MU-NO-HC: healing cap
MU-S-SP14: castable sleeve
MU-S-ST14 titanium sleeve
MU-NO-CT: snap-on cap for closed transfer
MU-NM-CT: closed tray transfer
DS-NM07, DS-NM10, DS-NM13: scan post L - 7mm, 10mm, 13mm
TBMU-M14: ti-base M1.4
MU-S-FX14, MU-S-MX14: fixation screw short/long
PUD-M14: plastic holder
MUIH14: metal position holder
SD-FSRC: Full kit
FRD-01: 2x implant remover screw Ø1.6/1.8mm
FRD-02: 2x implant remover screw Ø2.0/2.5mm
D-REM08: remove drill Ø0.8mm L 32.5mm
D-RED08: reverse drill Ø0.8mm L 30mm
TD-08: tap drill Ø0.8mm L 30mm
TH-03: turning handle
FTD-01: flat tip driver Ø2.5mm L 26mm
G-HS: hex submerged
G-TSV: TSV 3.7/4.1
G-TRI: tri-lobe
G-SN: submerged narrow
GH-01: guide holder
SDWRH-02: long wrench
MUA-NO-10, MUA-NO-20, MUA-NO-30, MUA-NO-40, MUA-NO-50: Straight multi-unit 1.4M
PUD-M14: Abutment position holder
MUA-NO-1720, MUA-NO-1730, MUA-NO-1740, MUA-NO-1750: Angulated multi-unit 17° 1.4M
MUA-NO-3020, MUA-NO-3030, MUA-NO-3040, MUA-NO-3050: Angulated multi-unit 30° 1.4M
MUA-NO-4520, MUA-NO-4530, MUA-NO-4540, MUA-NO-4550: Angulated multi-unit 45° 1.4M
MUA-NO-5220: Angulated multi-unit 52° 1.4M
MUA-NO-6020: Angulated multi-unit 60° 1.4M
SD2024L16C: Ø2.0/2.4mm Length 16mm
SD2028L16C: Ø2.0/2.8mm Length 16mm
SD2832L16C: Ø2.8/3.2mm Length 16mm
SD32365L16C: Ø3.2/3.65mm Length 16mm
SD3642L16C: Ø3.65/4.2mm Length 16mm
SD4045L16C: Ø4.0/4.5mm Length 16mm
SD4246L16C: Ø4.2/4.6mm Length 16mm
SD4652L16C: Ø4.6/5.2mm Length 16mm
SD5256L16C: Ø5.2/5.6mm Length 16mm
UN-RDK: universal driver kit that includes the universal driver, ratchet adapter (hexagonal by default but can be changed for a square per request) and a manual adapter.
MM-UNR: Universal Driver - Standard Length 31mm
MM-UNS: Universal Driver - Short Version 25mm- perfect for limited spaces
ULN-A1 : DSI UniLite Nano Composite 4g, Shade A1
ULN-A2 : DSI UniLite Nano Composite 4g, Shade A2
ULN-A3 : DSI UniLite Nano Composite 4g, Shade A3
ULN-A3.5 : DSI UniLite Nano Composite 4g, Shade A3.5
ULN-A4 : DSI UniLite Nano Composite 4g, Shade A4
ULN-B1 : DSI UniLite Nano Composite 4g, Shade B1
ULN-B2 : DSI UniLite Nano Composite 4g, Shade B2
ULN-C1 : DSI UniLite Nano Composite 4g, Shade C1
ULN-C2 : DSI UniLite Nano Composite 4g, Shade C2
ULN-D1 : DSI UniLite Nano Composite 4g, Shade D1
ULN-D2 : DSI UniLite Nano Composite 4g, Shade D2
ULN-O : DSI UniLite Nano Composite 4g, Opaque
ULN-BL : DSI UniLite Nano Composite 4g, Bleach
ULN-G1 : DSI UniLite Nano Composite 4g, Shade G1
ULN-G2 : DSI UniLite Nano Composite 4g, Shade G2
SK003: DSI full surgical kit
LD150: lance drill Ø1.5mm
PD190: pilot drill Ø1.9mm
PD200, TD280, TD320, TD365, TD400, TD420, TD450, TD520: Cylindrical drills Ø 2.0, 2.8, 3.2, 3.65,4.0,4.2, 4.5 and 5.2mm
CD375, CD500: Countersink drills Ø3.75-4.2mm, Ø5.0-6.0mm
TDE: drill extender
RDS2010, RDS2015: ratchet driver Ø2.00mm, L (10mm, 15mm) for narrow implant Ø3.00mm
RDK24100, RDK24150: ratchet driver Ø2.42mm, L (10mm, 15mm) for implants
RDK125100, RDK125150: ratchet driver Ø1.25mm, L (10mm, 15mm) for abutments
HDK125100, HDK125150: hand abutment driver Ø1.25mm L (10mm, 15mm)
SPP100, SPP160: Jag parallel guide pins - L10,16mm
MM12520, MM12528: motor mount hex driver Ø1.25mm, L(20, 28mm) for abutments
MM24220, MM24028: motor mount hex driver Ø2.42mm, L(20, 28mm) for implants
SR: wrench ratchet 6.35 hexagonal head
1000201: torque ratchet - torque 10-35 Ncm
DPKOP: depth gauge measuring tool
PAL94150: removable stainless surgical tray
DMS10101, DMS10102: mini screw Ø1.5mm, TM 1.0mm, blade length 6, 8mm
DMS10201, DMS10202, DMS10203, DMS10204, DMS10205: mini screw Ø1.5mm, TM 2.0mm, blade length 6, 8, 10, 12, 14mm
DMS10203, DMS10204: mini screw Ø2.0mm, TM 2.0mm, blade length 10, 12mm
DMS2014, DMS2016: buccal shelf screw Ø2.0mm TM 4.0mm blade length 10, 12mm
DMS1017: zygomatic screw: Ø2.0mm TM 8.0mm blade length 9mm
DMS10241, DMS10242: bracket head screw Ø1.5mm TM 1.0mm length 6, 8mm
.webp){kind=icon}
.webp){kind=icon}
.webp){kind=icon}
.webp){kind=icon}