SD-IPD/SD-IPD2: Full kit
S-12, L-12: Ø1.2mm L (23.5 and 30mm) compatible (Biomet 3i / Dentsply Xive / DIO UF / Global D / Hiossen / Keystone Renova, Restore / Megagen / Neo Biotech / Osstem / Tekka)
S-125, L-125: Ø1.25mm L (23.5 and 30mm) compatible (AB-Dent / Adin / Alpha-bio / Anthorgyr / BEGO / Bio Horizon External, Internal / Camlog / Cortex / Dentis / Dentium / Ditron / DSI / Implant Direct / Key Stone (Paltop), Prime Connex / Lasak Bioniq / MIS internal hex / Zimmer)
S-13, L-13: Ø1.3mm L (23.5 and 30mm) compatible (Astratech Ev / DYNA / Kentec / Platon)
S-BM, L-BM: Ø1.7mm L (23.5 and 30mm) compatible (Nobel Active / Branemark / Replace Select etc)
S-SM, L-SM: Ø1.7mm L (23.5 and 30mm) compatible (Straumann)
TH-01: turning handle
R.C CON: wrench condenser
ratchet wrench included only in SD-IPD2 kit
DSI-CB-FG7004, DSI-CB-FG7006, DSI-CB-FG7008, DSI-CB-FG7009: FG Round bur Ø1.4, 1.8, 2.3, 2.5mm
DSI-CB-FG7901, DSI-CB-FG7902, DSI-CB-FG7903: FG Needle bur Ø0.9, 1.0, 1.2mm
DSI-CB-FG7104, DSI-CB-FG7106, DSI-CB-FG7108: FG Flame bur Ø1.4, 1.8, 2.3mm
DSI-CB-FG7214: FG Taper trimming bur Ø1.0mm
DSI-CB-FG7404, DSI-CB-FG7406, DSI-CB-FG7408: FG Egg bur Ø1.4, 1.8, 2.3mm
DSI-CB-FG7801, DSI-CB-FG7802, DSI-CB-FG7803: FG Bullet bur Ø1.4, 1.8, 2.3mm
DSI-CB-FG7114: FG Taper short bur Ø0.9mm
DSI-CB-FG7174: FG Flat end taper Ø1.4mm
DSI-CB-FG7204, DSI-CB-FG7206: FG Finishing long taper Ø1.4, 1.8mm
RA7004, RA7005, RA7006, RA7007: FG Round bur Ø1.4, 1.6, 1.8, 2.1mm
SSFTMU-K: transfer screw
STFMU-K: open tray transfer
SAFMU-K: titanium analog
SHCFMU-K: healing cap
SSTFMU-K: titanium sleeve abutment
SSPFMU-K: castable sleeve abutment
STFMU-KC: snap-on closed transfer
SP-DS3: scan post abutment
TB-DS4: ti-base for multi-unit
SAFMU-3D: 3D printing analog for MUA
LSFMU-K: fixation long screws
SSFMU-K: fixation short screws
MUD-M1.6: metal position holder
DS-CETCH: Etching semi-gel material 5% buffered, in a bottler 5ml. Best to use with DSI SILANE
SAAC15-1, SAAC15-2, SAAC15-3, SAAC15-4: Angulated concave abutment 15° *Regular*
SAAC25-1, SAAC25-2, SAAC25-3, SAAC25-4: Angulated concave abutment 25° *Regular*
STAA15-S: Angulated abutment 15° *Narrow*
STAA15:-7 Angulated abutment 15° 7mm height *Regular*
STAA15, STAA15L: Angulated abutment 15° 9 and 11mm height *Regular*
STAA25, STAA25L: Angulated abutment 25° 9 and 11mm height *Regular*
STAA35: Angulated abutment 35° *Regular*
STAA45: Angulated abutment 45° *Regular*
STAA15-1, STAA15-2, STAA15-3, STAA15-4: Angulated anatomic abutment 15° *Regular*
STAA25-1, STAA25-2, STAA25-3, STAA25-4: Angulated anatomic abutment 25° *Regular*
SBA05, SBA1, SBA2, SBA3, SBA4, SBA5, SBA6, SBA7: Straight ball attachment *Regular*
SBA1S, SBA2S, SBA3S, SBA4S, SBA5S, SBA6S: Straight ball attachment *Narrow*
SBA370: Analog for ball attachment
BAT-PU: Transfer for ball attachment
MU-BAT: Connector for Next-Gen multi-unit
008MDS: Sphere diameter measuring tool
485IC: Insertion and extraction tool for silicone caps
LD120, LD150: lance drill Ø1.2, 1.5mm
PD190: marking drill Ø1.9mm
TDE: drill extender
CD375, CD500: countersink drill Ø3.75-4.2mm, 5.0-6.0mm
TB200, TB300, TB400, TB500: Ø2.0-3.0mm, 3.0-4.0mm, 4.0-5.0mm, 5.0-6.0mm
TP30, TP40, TP45, TP50: Ø3.0, 4.0, 4.5, 5.0mm
DR300, DR320, DR360, DR400, DR420: smart drills Ø2.8, 3.2, 3.6, 4.0, 4.2mm
PABAT-1810, PABAT-1820, PABAT-1830: Angulated ball attachment *full kit 18° *Regular*
PABAT-3010, PABAT-3020, PABAT-3030: Angulated ball attachment *full kit 30° *Regular*
PABAT-4010, PABAT-4020, PABAT-4030: Angulated ball attachment *full kit 40° *Regular*
BABAT-1810, BABAT-1820, BABAT-1830: Angulated ball attachment *basic kit 18° *Regular*
BABAT-3010, BABAT-3020, BABAT-3030: Angulated ball attachment *basic kit 30° *Regular*
BABAT-4010, BABAT-4020, BABAT-4030: Angulated ball attachment *basic kit 40° *Regular*
PSBA05, PSBA10, PSBA20, PSBA30, PSBA40, PSBA50, PSBA60, PSBA70: Straight ball attachment *full kit *Regular*
PSBA10S, PSBA20S, PSBA30S, PSBA40S, PSBA50S, PSBA60S: Straight ball attachment *full kit *Narrow*
SBA370: Analog for ball attachment
BAT-PU: Transfer for ball attachment
MU-BAT: Connector for Next-Gen multi-unit
008MDS: Sphere diameter measuring tool
485IC: Insertion and extraction tool for silicone caps
LOC-NB-NP1810, LOC-NB-NP1820, LOC-NB-NP1830: Angulated conical loc-in attachment 18° NP platform 3.5mm conical connection
LOC-NB-NP3010, LOC-NB-NP3020, LOC-NB-NP3030: Angulated conical loc-in attachment 30° NP platform 3.5mm conical connection
LOC-NB-RP1810, LOC-NB-RP1820, LOC-NB-RP1830: Angulated conical loc-in attachment 18° RP platform 4.3-5.0mm conical connection
LOC-NB-RP3010, LOC-NB-RP3020, LOC-NB-RP3030: Angulated conical loc-in attachment 30° RP platform 4.3-5.0mm conical connection
PLOC-NB-NP1810, PLOC-NB-NP1820, PLOC-NB-NP1830: Angulated conical loc-in attachment 18° NP platform 3.5mm conical connection
PLOC-NB-NP3010, PLOC-NB-NP3020, PLOC-NB-NP3030: Angulated conical loc-in attachment 30° NP platform 3.5mm conical connection
PLOC-NB-RP1810, PLOC-NB-RP1820, PLOC-NB-RP1830: Angulated conical loc-in attachment 18° RP platform 4.3-5.0mm conical connection
PLOC-NB-RP3010, PLOC-NB-RP3020, PLOC-NB-RP3030: Angulated conical loc-in attachment 30° RP platform 4.3-5.0mm conical connection
SD-BMS: Full kit
SDEXP-01, SDEXP-02, SDEXP-03, SDEXP-04, SDEXP-05: expander drill Ø1.8/2.5, 2.0/3.0, 2.5/3.5, 2.8/4.0, 3.0/4.5mm
SDADP-01: handpiece condenser
SDGDL-02: guide drill
SDSAW-07, SDSAW-09: saw disk Ø7.0, 9.0mm
WA-01: wrench adapter
SA-01: spreading adapter
SP-01: spreading pin
CT-50: contouring bur Ø5.0mm
NLBC-50: NLBC drill Ø5.0mm
NLBC-ST5: stopper for NLBC drill
SDWRH-00: ratchet wrench
SCL-05: curved chisel
SCI0835, SCI1035, SCI1135, SCI1335, SCI1635: Ø3.5mm H (8, 10, 11.5, 13 and 16mm) NP platform
SCI0843, SCI1043, SCI1143, SCI1343, SCI1643: Ø4.3mm H (8, 10, 11.5, 13 and 16mm) RP platform
SCI0650, SCI0850, SCI1050, SCI1150, SCI1350, SCI1650: Ø5.0mm H (6, 8, 10, 11.5, 13 and 16mm) RP platform
TD280L6SC, SD2028L8SC, SD2028L10SC, SD2028L115SC, SD2028L13SC: DLC Step&Stop Drill Ø2.0-2.8mm L (6, 8, 10, 11.5, 13mm)
TD320L6SC, SD2832L8SC, SD2832L10SC, SD2832L115SC, SD2832L13SC: DLC Step&Stop Drill Ø2.8-3.2mm L (6, 8, 10, 11.5, 13mm)
TD365L6SC, SD32365L8SC, SD32365L10SC, SD32365L115SC, SD32365L13SC: DLC Step&Stop Drill Ø3.2-3.65mm L (6, 8, 10, 11.5, 13mm)
TD400L6SC, SD36540L8SC, SD36540L10SC, SD36540L115SC, SD36540L13SC: DLC Step&Stop Drill Ø3.65-4.0mm L (6, 8, 10, 11.5, 13mm)
TD450L6SC, SD4045L8SC, SD4045L10SC, SD4045L115SC, SD4045L13SC: DLC Step&Stop Drill Ø4.0-4.5mm L (6, 8, 10, 11.5, 13mm)
SD-CL: Full kit
SD-GD20: guide drill Ø2.0mm
SD-RM28, SD-RM33, SD-RM37: SD- Reamer Ø2.8, 3.3, 3.7mm
SDST-03, SDST-04, SDST-05, SDST-06, SDST-07, SDST-08: crestal stopper L (3, 4, 5, 6, 7, 8mm)
LAST-01, LAST-10, LAST-15, LAST-20, LAST-25: lateral stopper L (0.5, 1.0, 1.5, 2.0, 2.5mm)
SDWRH-00: ratchet wrench
LASC-70: lateral side cutter Ø7.0mm
LACD-80: lateral core drill Ø8.0mm
LASR-80: lateral sinus reamer Ø8.0mm
CLS30, CLS35: crestal aqua tip Ø3.0, 3.5mm
SDADP-02: handpiece condenser
R.C EXT: ratchet extension
TOLA2-01, TOLA2-02, TOLA2-03: curette
MP-BP: bone packer
STB: silicone tube
TB-DS1, TB-DSH1, TB-DSH2, TB-DSH3, TB-DSH4: Ti-Base anatomic abutment hexagonal connection *Regular*
TB-DS2, TB-DSR1, TB-DSR2, TB-DSR3, TB-DSR4: Ti-Base anatomic abutment rotational connection *Regular*
TB-DSN: Ti-Base abutment hexagonal connection *Narrow*
TB-DSNR: Ti-Base abutment rotational connection *Narrow*
SP-DSN: Scanpost *Narrow*
SP-DS1: Scanpost *Regular*
SP-DST: Titanium Scanpost *Regular*
SK003: DSI full surgical kit
LD150: lance drill Ø1.5mm
PD190: pilot drill Ø1.9mm
PD200, TD280, TD320, TD365, TD400, TD420, TD450, TD520: Cylindrical drills Ø 2.0, 2.8, 3.2, 3.65,4.0,4.2, 4.5 and 5.2mm
CD375, CD500: Countersink drills Ø3.75-4.2mm, Ø5.0-6.0mm
TDE: drill extender
RDS2010, RDS2015: ratchet driver Ø2.00mm, L (10mm, 15mm) for narrow implant Ø3.00mm
RDK24100, RDK24150: ratchet driver Ø2.42mm, L (10mm, 15mm) for implants
RDK125100, RDK125150: ratchet driver Ø1.25mm, L (10mm, 15mm) for abutments
HDK125100, HDK125150: hand abutment driver Ø1.25mm L (10mm, 15mm)
SPP100, SPP160: Jag parallel guide pins - L10,16mm
MM12520, MM12528: motor mount hex driver Ø1.25mm, L(20, 28mm) for abutments
MM24220, MM24028: motor mount hex driver Ø2.42mm, L(20, 28mm) for implants
SR: wrench ratchet 6.35 hexagonal head
1000201: torque ratchet - torque 10-35 Ncm
DPKOP: depth gauge measuring tool
PAL94150: removable stainless surgical tray